Profax 300 amp, 3 phase, 100% Duty-Cycle Analog (no expensive PC boards) Mig Power supply. Continuous voltage control, "fan-on demand" ( only runs when necessary). The unit comes with a Miller-style 14-pin direct connection. Will accept any 24-volt wire feed or spool gun with standard Miller-style connection.
Mechanical sliding brush voltage control. The most dependable power supply design ever made.
3-year warranty on parts and labor.
Price includes expected truck freight delivery to the lower continental 48 states. It can be shipped almost anywhere.
top of page
$4,920.40Price
Weldmart "Ezzee Idler Upgrade" System

The Weldmart Centurion PC board is the most advanced and easiest board to troubleshoot. Three different colored LED indicate status of the board.
The board can be used with a Reed Switch or with the "Hall-Effect Sensor" mounted in the right had corner of the board a simple wire takes the place of the reed switch.
With power to the board, you test the board by passing a small magnet over the Hall Effect Sensor, if the board is good, it will switch from low idle to high welding speed. No meters, no test lights, no guessing!
To check your idler solenoid, with power on, remove the wire on terminal 4 adn touch it to on if the mounting bolts. You get a small spark and hear the solenoid "pull-in".

bottom of page

