Carburetors for Continental F-162/F-163 Engines Used on Lincoln and Miller Electric Welding Machines
These carburetors are direct replacement units for the Marvel Schriver® (Lincoln P/N: S-12875) and the Lincoln® carburetor (P/N: M-12484). These carburetors are only for Continental® F-162 and Continental® F-163 engines. These engines were found on the Lincoln® SA-200, Lincon SA-250, Lincoln® SAE-300, Lincoln SAE-400, Miller® Big 40-G, Big 20, and Miller® Trailblazer 40 and 44-G welders.
We also offer Marvel Schriver® rebuild carburetors. A rebuild of will core is required, or a core charge will be assessed upon shipment.
We highly recommend that a high-quality "in-line" fuel filter be installed on all engine-driven welding machines. We recommend, if the machine is not going to be used for a period of 48 hours, that you shut off at the tank, the engine started and allowed to "run-dry". This will assure that all the gasoline in the fuel line and carburetor is exhausted, which assures that no gasoline is allowed to evaporate and leave a contaminating residue in the carburetor.
These units are new and are direct replacements for OEM units. Stop wasting time and money: replace that worn out carburetor today!
If your replacement carburetor is not shown on these pages or if you have any questions relating to a carburetor found on a engine-driven welding machine -- any make, model, or year -- contact us directly: 1-800-460-6474, or firstname.lastname@example.org.