Reliable Ezze Idler Upgrade Kit" replaces and upgrades, with greatly improved performance, original equipment idler controls. This unit upgrades all Lincoln SA200 Welders (with 12 volt electrical supplies) from 1939 thru 1992 with the Continental F162 and F163 engines.The Idler kit also replaces and upgrades the idler systems on the Miller Big 40 G and Trailblazer 44G (with the Continental engines), the Linde 300, AO Smith 300, and the Chemtron 300 NT. The Ezze Idler kit is designed for the end user to install, maintain, and service. The idler kit includes all necessary parts, instructions, an electrical testing kit, and an unlimited toll free 800 number for technical assistance on the Ezze Idler Kit.
All stainless steet linkage.
Includes oil pressure sensor and hi/lo switch. Ground freight paid to any United States continental address.
top of page
SKU: REI-0001
$395.50Price
Weldmart "Ezzee Idler Upgrade" System

The Weldmart Centurion PC board is the most advanced and easiest board to troubleshoot. Three different colored LED indicate status of the board.
The board can be used with a Reed Switch or with the "Hall-Effect Sensor" mounted in the right had corner of the board a simple wire takes the place of the reed switch.
With power to the board, you test the board by passing a small magnet over the Hall Effect Sensor, if the board is good, it will switch from low idle to high welding speed. No meters, no test lights, no guessing!
To check your idler solenoid, with power on, remove the wire on terminal 4 adn touch it to on if the mounting bolts. You get a small spark and hear the solenoid "pull-in".

bottom of page

