weldmart,weldmart-online,linde,ltec,l-tec,esab,prestolite,prest-o-lite,oxweld,purox,miller,lincoln,994165,994264,MIG-130,MIG130,LINDE160,600414,LTEC225,L-TEC225,999621,2075312,2075313,2075311,999056,999056,999742,996994,996995,996999,000560,679467,950369,678317,MIGMASTER 250,airco,heli-arc,heliarc,tig,tig welding,migmaster,aristro,mig31,mig-31,mig32.mig-32,mig35,mig-35,mig 4hd,miniarc,miniarc 90i,mig2e,mig-2e,mobilemaster,mig28,mig28a,mig-28,mig-28a,digimig,digimig dual,digipulse,digmatic,digipulse,fc-5b,632793,632795,632797,632799,633108,633109,633110,633116,999578,948340,948341,2075230,20543,20544,996995,996999,2075349,996997,999742,996994,996996,998893,998894,998895,999471,999472,999473,17766,948786,948785,17983,17984,948850,2075237,2075239,2075238,2075240,18316,647257,636924,2361-2366,636476,636202,1377-9852,st-16,mt-200,mt-400,vi-252,vi-253,VI252,VI253,VI400,VI-400,VI-650,VI650,SWM-28,SWM28
COMMON SENSE ANSWERS FOR THE WELDING FABRICATION INDUSTRY
MILLER STYLE 14 PIN RECEPTACLE DIAGRAM
1. With the machine turned on (the cooling fan may or may not run with the machine "on"). Normally of the machine has a pilot light that lights when the machine is "ON".
2. With a meter on AC Voltage check between pins A & B. You should see 24 Volts AC (a digital my read higher than 24 volts).
3. With a meter on "AC Voltage" check between pins I & G you should see 115 volts AC (a digital my read higher than 24 volts).
4.Jumpering Pins A & B will "turn on" the contactor-you should see the volt meter should read open circuit voltage (normally 25 volts DC or higher)
5. Turn the machine power off. With and Ohmmeter on the R X 1 scale you should have continuity between Pin K and the welder chassis (try one of the sheet metal bolts).
If these test are all positive, you have a Miller style 14 pin receptacle. You find this receptacle on Miller®, Comparc® (Mexico), and older Thermal-Arc® power supplies.
CLICK ON THE FOLDING ENVELOPE AND SEND US A MESSAGE!
CLICK ON THE CHAIN TO RETURN TO OUR HOME PAGE
