COMMON SENSE ANSWERS FOR THE WELDING FABRICATION INDUSTRY
MILLER® REPLACEMENT INTERCONNECTING CABLES
The cables offer here are designed to connect Miller wirefeeders to Miller power supplies. We offer original Miller OEM or aftermarket assemblies that are identical to OEM and we guaranteed our aftermarket parts to be equal, if not superior to Miller OEM. At the bottom of this page are links that will allow you to contact one of our application specialist.
To make it easier to identify the replacement cables you need we will list them by the Miller wirefeeder they are used with.
Cable assemblies available in 10, 25, 50, 75, and 100 feet long assemblies.
Miller S22 Feeders Wirefeeder
Cable assembly is a six wire cable that hardwires into the S-22 wirefeeder and has a 14 pin Amp plug on the other.
Miller 50 Series Wirefeeders
Interconnecting cables for the older style Miller 50 series wirefeeders (4 wire cable) to any Miller power supplies that use a 14 pin Amp socket.
WIRE
FEEDER CONNECTOR-FOUR PIN
Miller 50 Series Wirefeeders with Hubbell Plugs
These cables allow the older style Miller 50A wire feeders (with a four pin AMP socket) to newer style Miller power supplies with the 14 pin socket.
WIRE FEEDER CONNECTOR-FOUR PIN, plugs in to the back of the 50 style wirefeeders.
WIRE
FEEDER MALE HUBBELL STYLE PLUG-THREE PIN: Plugs into the Miller power supply.
NOTE: Contactor plug (not shown) is a Hubbell style 2 pin female connector.
Interconnecting Cables for 10A, 30A, & 30 B Wirefeeders with Hubbell Plugs
These cables allow the older style Miller 10A, 30A & 30B wire feeders to connect older style Miller (and Airco) power supply that used Hubbell style plugs & connectors, for both the wirefeeder and the power supply.
WIRE
FEEDER MALE HUBBELL STYLE PLUG-THREE PIN: Plugs into the Miller power supply.
(supplies 120 vac from the power supply to the wirefeeder)
WIRE
FEEDER MALE HUBBELL CONNECTOR-THREE PIN: Plugs into the Miller wirefeeder.
(feeds120 vac from the power supply to the wirefeeder)
FEEDER CONTACTOR TWO PIN MALE PLUG: Plugs into the back of the feeder
(this plug is on the wirefeeder end of the contactor control; cable- it feeds 120 vac back to the power supply to energize the contactor circuit)
CLICK ON THE EMAIL LETTER FOR MORE INFORMATION, TO PLACE AN ORDER OR TO SEND US A MESSAGE!
CALL US AT 1-800-460-6474 OR FAX US AT :281-749-8117
CLICK ON THE BLUE
BUTTON TO RETURN TO OUR
HOME PAGE
