HYPERTHERM® PAC-110® PLASMA CUTTING TORCH
The PAC-110® plasma torch is Hypertherms compact, low cost "gas cooled" torch, 20 amps cutting current. Hypertherm says that this torch will cut 3/16", severs 1/4". This torch uses a unique arc starting the pilot arc method The the electrode touches the nozzle and retracts, when air pressure is applied, to initiate the pilot arc, there is no "high frequency" arc starting. You will find this torch on the Max 20 & Powemax 350™.
NOTE: We make and stock complete lead assemblies for this torch. Click HERE to send us a message. If you require immediate assistance, call us at the toll free number at the bottom of this page.
TO CONTACT US OR TO PLACE AN ORDER, CLICK ON THE ENVELOPE AND SEND US A MESSAGE!
OR CALL US TOLL FREE AT 800-460-6474
CLICK ON THE CHAIN TO RETURN TO OUR HOME PAGE
Hypertherm and Max 20 are registered trademarks and property of Hypertherm Inc.. Weldmart-Online is in no way affiliated with Hypertherm Inc. References to the named torches, machines, and part numbers are for the convenience of our customers only. This web page is copyrighted by Weldmart-Online 2002 and reproduction In any form is prohibited by law. The replacement parts, replacement torch heads, replacement cable assemblies and complete replacement troches are not Esab OEM items. Weldmart-Online reserves the right to substitute original OEM parts where necessary. The original graphics are copyright of Thermacut Inc. and are used with permission.
